english slovensky bulharsky polski Home page E-mail Form Downloadlogo Častulík

TwinShaft shredders - in general

TwinShaft shredder DR160 TwinShaft shredder DR340 TwinShaft shredder DR160 TwinShaft shredder DR160
Processing of material in the twin-shaft shredder employs the principle of cutting and scraping material on the edges of discs placed on two working shafts turning against each other. Two sets of tearing discs having the same width with hooks around the perimeter, set on two parallel shafts are the working tools. The processed material takes shape of irregular strips which width is defined by shredding disc width. The processed material falls into the area under the machine on the floor or into a prepared container possibly a conveyor.
The control system prevents the overfilling and overloading of the machine. The control system can even control the drive of the load-up and lift-up conveyors. Moreover, the infeed hopper can be equipped with sensors of minimum and maximum level of material.
The shedder can be equipped by a hydraulic pusher that enables processing of a large-volume scrap material (e. g. plastic barrels) by periodical pushing of the material into engagement of shredding discs.

We provide the twin-shaft shredders with wide range of applica-tions in 4 basic variants: mini, light, medium and heavy-dutyseries.
Distance between rotor axes [mm]120160240340
Shredding disc width [mm]28 (18)28 (9;18)38 (58;78)78 (98;118)
Rotor speed [1/min]14 to 4114 to 4114 to 419 to 32
Inlet [mm]350 x 300400 x 350 to 600600 x 500 to 1300850 x 900 to 2000
Max. torque [kNm]1,53,824,580
Motor input [kW]2,2 to 7,57,5 to 2222 to 10052 to 200
Equipment weight [kg]650 to 750700 to 17002000 t 800010 000 to 20 000
Dimensions [m] - width/length/height1,1/1,4/2,82/1,4 to 2,3/2,22,6/2,6 to 3,6/2,73,2/4 to 6,5/3,2